コンプレッサーの運転条件

Mar 09, 2020

コンプレッサーの運転条件の改善、パイプラインの合理的な配置、抵抗損失の最小化、メンテナンスとガス管理の強化に留意してください。

(1) 吸気状態を改善する。まず、吸込みパイプの設計には十分な断面積が必要です(空気の場合、流量は 10 ~ 12 メートル / 秒を超えない)。パイプはできるだけ短く、急な曲がり、収縮、冗長な取り付けがあってはなりません。 2 つ目は、吸気温度を下げることです。これにより、コンプレッサーの実際の吸気量が増加し、コンプレッサーの固有の電力消費も削減できます。コンプレッサーの吸入口は屋外の涼しい場所に設置し、必要に応じて散水等による冷却方法をとってください。また、ピストン式の場合は熱伝導率が高く、清掃が容易な冷却器を選択してください。クーラーは定期的に掃除する必要があります。実際には、吸気温度が 3 度低下するごとに、後段の消費電力が約 1% 削減されることがわかっています。

(2) Reduce the pressure loss of the pipeline. When designing or installing pipelines, the length of the pipeline should be shortened as much as possible, unnecessary pipe fittings such as tees, elbows, valves, etc. should be reduced, or pipe bends should be reduced or bends with a small radius of curvature should be used. The filter on the pipeline should have low resistance and be able to easily remove dirt. The cross-sectional size of the pipeline should be such that the air flow rate is not too large. If the air flow rate is Qm3 / min, the diameter of the pipe is D>20√Qmm。一般的な空気は8〜10メートル/秒を超えません。また、ガスの漏れを少なくする必要がある。コンプレッサー内部とコンプレッサー外部との各段階の圧力差により、ピストンリング、エアバルブ、パッキン等から漏れが発生し、排気ガスの損失や消費電力の増加につながります。